Conflicts for Table 441 MOD009D4E New from DB 39.5.14

Access path

• DB Update / ICOU Configuration Conflicts Click on the link in the area of the required data table

Information

• In this module, the conflicts of the data table are listed.
• Solutions can be selected for and applied to each conflict.

Details

• In the header area of the module there are the buttons via which the (marked) conflict solutions can be applied.
• In the next lines the adjusted records are displayed with the current data from the customizing (live data). Only the columns of the data table in which there is a conflict in any record are displayed, i.e. the displayed columns are defined via the customer adjustments.
  • The DI which has changed is highlighted in color by means of a traffic light.
    • : The current customizing state corresponds to the individual change.
    • : The current customizing state corresponds to the reference value , i.e. the PLANTA value from the PLANTA standard system is equivalent to the state of the PLANTA system which is currently being used at the customer’s site.
    • : The current customizing state corresponds to the new PLANTA value, i.e. to the value from the new PLANTA standard system (PLANTA system to which the customer is just updating).
    • : The current customizing state does not correspond to any of the three values, i.e. the customizing has been adjusted in the meantime after the DB update.
• In the area below the DI changed respectively is displayed with the reference value, the individual value, and the PLANTA value and you can decide how the conflict is dealt with.
  • By clicking on the button in the respective area, the live data can be applied as a reference value or as an Individual value.

Apply conflict solutions

• In the right area, select an action for the respective conflict via the Action listbox:
  • Unedited: No conflict solution is used for the conflict.
  • Change to PLANTA Standard: The new PLANTA value is used.
  • Change to individual value: The individual value is used. This change is automatically applied to all subsequent updates if the initial situation has not changed.
  • Change to individual value (do not ask again): The individual value is always used, i.e. also if the initial situation has changed.
    • The Change to individual value option is selected by default.
• Mark the required records and click on the Use marked conflict solutions button if you only want to apply a part of the conflict solutions.
• Otherwise click on the Use conflict solutions for this table button to apply all conflict solutions in the table.
  • Alternatively you can apply the conflict solutions in the Conflicts module to all data tables at once.